0 start-up and operation, 1 micro-pwc startup, 1 startup options – Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setup Manual User Manual
Page 51: 2 micro-pwc program group, 0 - start-up and operation, Figure 4-1. micro-pwc program group, Section 4.0, start-up and operation
Micro-PWC
™ Installation & Setup Guide
Start-up and Operation 41
4.0 START-UP and OPERATION
4.1 Micro-PWC Startup
4.1.1 Startup Options
Micro-PWC system startup behavior is determined by the options selected during Micro-PWC system
installation. (To view or change the startup options, select Setup from the Micro-PWC system program
group.)
If the Start Micro-PWC Displays Automatically option was selected, then each time the Windows software
is restarted, the user named capuser is automatically logged in, and the Micro-PWC system windows (the
System Window, Process Alarm Window and Operator Window[s]) are automatically opened. (See
, for details on the capuser account.)
If the Start Micro-PWC Displays Automatically option was not selected, then the Micro-PWC system dis-
plays can be started by logging in to the Windows software with an administrator account other than
capuser, and selecting Start > Programs > MicroMod Automation > Micro-PWC > System Window to start
the Micro-PWC system displays.
Both the capuser account and the administrator account belong to the Administrators group.
4.1.2 Micro-PWC Program Group
When Micro-PWC system setup is complete, the following Windows Program Group is created:
✎ NOTE
The Micro-PWC system software can only be run if you are logged
into a Windows user account which belongs to the Administrators
group. If you log into an account which is not a member of the
Administrators group, an error dialog box containing the following
message will appear whenever you try to open a Micro-PWC
system window:
Unable to communicate to the service manager
Figure 4-1. Micro-PWC Program Group