Minuteman Kleen Sweep 27M - Manual (Page 13)

13
Grease track wheels
For cleaning and greasing the axle
and pinion, remove track wheels as
follows:
GRemove hub caps
Insert two screwdrivers into the
slots marked by arrows, and remo-
ve the hub cap using the screwdri-
ver as a lever, applying force in a
uniform manner (fig. A).
GThen remove the circlip from the
wheel axle and remove the track
wheel (fig. C).
GGrease axle and pinion
GRe-assemble track wheel.
Attach hub cap as shown in fig. B,
check for index marks in place
(arrows).
A B C