Minuteman Kleen Sweep 27M - Manual (Page 6)

6
GAttach size broom arm with plug
(C/1) and safety pin (D/3).
Introduce plug from outside;
GSlue side broom down and adjust
broom height, or better said,
broom pressure with knurled-head
bolt (D/1); loosen knurled nut (D/2).
Side broom should not be seated
on the floor with more than 2/3 of
its circumference. Secure with
knurled check-nut;
B C D
Attach side broom
GUnpack side broom arm and
broom;
GPlug side broom on broom shaft
and secure with bolt; use 10 mm
spanner size. Do not overtorque
bolt to avoid damage to the broom
hub;
GPlace the Vee belt in the pulley
over the RH wheel; side broom will
have to rotate CCW when machine
moves forward (top view);
G Check belt tension, adjust tension
as required (refer to para. ”Side
broom“ on page 21).