Minuteman E17e - Manual (Page 13)

Description
13
3. Close the body back and secure it with screws and Rubber caps.
Remove the two tie-bolts outside the body of the Machine .
Tie bolt
4. Take the machine out of the pallette carefully. Fit the drain hoses
(2 Nos.) ensuring the position of hooked end of the hoses. Take the
power cord through the cable retainer.
You now can take machine from the platform.
IMPORTANT - If the supply cord is damaged, it must be replaced by a special cord available from the
manufacturer or an authorised service agent.
Description
1.Adjustable handle
2.Knob - handle
3.Lever for lifting the squeegee
4.Switch to unlock the brush
1
2
4
3
Controls