Minuteman E17e - Manual (Page 18)

18
Turn on switch "B" for a short time in order to allow locking
.
Note: The brush must snap in immediately. A rattling noise indicates that the brush head is not correctly
centered. Turn off switch "B”, correct position of brush head and turn on switch 'C' for locking. Now the brush is
locked. repeat locking operation.
Removal of brush
Empty the tanks.
Lift the squeegee and the brush.
Turn on switch "B” for unlocking of Brush.
Turn off the machine
Press the rear end of the machine
downwards.
pull the machine towards the rear,
Brush is now lying in front of the machine.