Taking into operation – Minuteman E17e User Manual
Page 21
21
50°C
max.
Filling of water
Before starting to work, fill-in fresh water and detergent as described
Below:
Open the tank lid and tilt it to the Rear.
Fill the fresh water tank with water (max 50 C) as required by the work and add
to be done, detergent as specified by the manufacturer.
°
Note: Use only detergent suitable for automatic machines (low foaming) if not, the suction
turbine Can damage by formation of excessive quantities of foam.
We recommend using our agents for cleaning and care, which are
adapted to the E 17e. Those products comply with the provisions
of the Detergents Act.
When the E 17e is being pushed, squeegee and brush drive plate must be lifted.
Operating Procedure
Turn on switch "B” the brush is rotating .
Turn the lever up , to discharge the detergent and position the lever
suitably to achieve the desired flow of Detergent.
Lower the brush head.
Lower the squeegee.
Turn on switch A the suction turbine is running.
Taking into operation