Minuteman PORT A SCRUB 14 - Manual (Page 25)

Control panel
1. Brush motor, suction motor and water pump switches
B. Suction motor switch ON / OFF
A. Brush motor switch ON / OFF
C Water pump switch ON / OFF
˜The Port A Scrub 14 allows mixing of cleaning lye and fresh water in the tank. The amount of detergent required for
cleaning can be regulated by the pump switch. If the switch is set to the position “I” the cleaning lye is continuously
supplied. If the solution is required by intervals only, press the switch and hold in position “I”. This function helps to save
detergent.
2. Detergent infeed
25
˜ Function in ON if switch “A” is in position “I”
˜ Function in ON if switch “B” is in position “I”
˜
˜
In “I” position of the switch, water is steadily pumped to the floor.
In “0” position of the switch, no water is pumped.
Pump Switch
A
C
B