Minuteman E 26 (7061.11) - Manual (Page 19)

17
Operation
Drive direction control with speed
control knob and bail handle (Fig. 4/
9)
The drive direction control (9a) is used
to control the driving direction (forward
or reverse). The bail handle must be
pulled in order to drive. The speed can
be adjusted continuously by means of
the speed control knob (9c). The machi-
ne stops when the bail handle is re-
leased (deadman function).
Secure the machine against
rolling away before leaving it
unattended.
Brush deck pedal(Fig. 5/1)
Use this pedal to lift and lower the brush
deck.
Opening of solution tank (Fig. 5/2)
The solution tank is filled after folding
up the opening.
Solution control (Fig. 5/3)
Squeegee water supply is regulated by
hand valve. The solution flow can be re-
gulated between 0 gal/min and 0.9 gal/
min.
Squeegee lever (Fig. 5/4)
Use the hand lever to lift and lower
the squeegee. This will deactivate
or activate the vacuum motor.
Solution tank filter (Fig. 5/5)
While solution flows from tank to brush
deck, it is cleaned by the filter element.
Recovery tank drain hose (Fig. 5/6)
This hose allows draining the collected
soiled water from the tank.
Solution tank drain hose (Fig. 5/7)
This hose allows draining the solution
tank.
Brush ejector (Fig. 5/8)
The brush ejector makes brush removal
fast and easy.
Power connection (Fig. 5/9)
The power connection supplies the
charger unit with power.
3.3