Function and location of the controls – MIDLAND 248 User Manual
Page 10
2
ENGLISH
2
FUNCTION AND LOCATION OF THE CONTROLS
1. Channel selector
2. Microphone jack: Insert the mic connector into this jack.
3. Multifunction backlighted display.
A. Channel selected number
B. The received signal strength and the power of the transmitting signal
C.
AM/FM mode
D.
RX/TX: TX=transmit mode; RX=receive mode
E.
SCAN mode
F.
EMG mode
G.
M1-M2-M3-M4: preset memory channels
H.
DW: Dual Watch activated
I. Frequency band selected.
J.
LOW: displayed when the radio transmits in low power (this mode is possible
with some frequency bands only – see the frequency band chart).
K.
LOCK: microphone (UP/DOWN buttons) lock enabled.
4. “ON/OFF Volume” Control: in ‘’off’’ position your transceiver is OFF. Turn this con-
1
3
12
6
7
5
4
2
Q.UP
M1
M2
M3
M4
DW
EMG
SCAN
Q.DOWN
15
16
10 13 11 14
8
17
9