MotorVac TRANSTECH IV - Manual (Page 5)

[email protected] www.motorvac.com
Control Panel Features and Functions
2
START/RESUME Button - Begins & Resumes service
DRAIN Button - Drains fluid from vehicle’s transmission.
FILL Button – Adds fluid to the transmission.
LOW VEHICLE FLUID LED - Illuminates when fluid in the vehicle in service is low or
empty.
COMPLETE LED - Illuminates when service is complete.
START ENGINE LED – The LED illuminates when the vehicle’s engine is running in inline
mode. The Start Engine LED flashes when the vehicle’s engine needs to be started.
STOP ENGINE LED – LED illuminates when the vehicle’s engine is OFF in inline mode.
The Stop Engine LED flashes when the vehicle’s engine needs to be stopped.
LOW CLEAN FLUID LED – Illuminates when clean fluid in the unit’s clean tank is low or
empty.
STOP BUTTON – Pauses service and stops alarms. Hold for 5 seconds to reset unit.
EMPTY WASTE BUTTON - Empties fluid from unit’s waste tank.
MODE BUTTON – Toggles between four different modes (Inline/Dipstick etc)