MotorVac TRANSTECH IV - Manual (Page 6)

[email protected] www.motorvac.com
Getting to Know the TransTech IV
3
Front Features
Control Panel – All electronic operational functions are initiated at this
location. See Control panel features section.
Filler Port & Cap – New ATF is poured into unit before service.
Pressure Gauge – Indicates fluid flow through the unit when in Inline mode.
Right Side Features
Dipstick Adapter – Manifold that is permanently attached to DIPSTICK
RETURN hose. The manifold allows the CLEAN FLUID hose to be attached
to it as well as connecting them to a common dipstick wand for the drain
and fill process
Dipstick Hanger – Allows the DIPSTICK RETURN hose and adapter to be
stored safely.
Clean Fluid Hose – Clean ATF is introduced to the vehicle through this
hose for both In-Line and Dipstick modes.
Dipstick Return Hose – Draws dirty ATF from the vehicles in Dipstick
Mode.
Left Side Features
In-Line Return Hose & Filter – Used ATF is drawn in from the vehicle
through this hose. The filter protects the unit from debris coming from the
vehicle in Inline Mode
Waste Disposal Hose - Is inserted into the shop’s fluid recycling container
or into a suitable container for proper disposal of used transmission fluid.
Disposal Hose Ball Valve - Open manually before EMPTY WASTE button
is pushed.