Multichannel Systems MEA2100-System Manual - Manual (Page 60)

MEA2100-System Manual
56
MEA2100 Interface Board: Digital IN / OUT Connector
68-Pin MCS Standard Connector
Pin 1 GNDP (power ground)
Pin 2 GNDS (signal ground)
Pin 3 - 10 Digital output channels bit 0 - 7
Pin 11 - 14 GNDS (signal ground)
Pin 15 - 22 Digital output channels bit 8 - 15
Pin 23 - 26 GNDS (signal ground)
Pin 27 - 34 Digital input channels bit 0 - 7
Pin 35 - 38 GNDS (signal ground)
Pin 39 - 46 Digital input channels bit 8 - 15
Pin 47 - 48 GNDS (signal ground)
Pin 49 - 63 Internal use (do not connect)
Pin 64 - 66 GNDS (signal ground)
Pin 67 Positive supply voltage output
Pin 68 Negative voltage supply output
Digital IN / OUT, separate available via Lemo Connectors
Separate Digital IN Lemo Connectors
Digital In 1 Bit 0 of the 16 bit digital input channels (Pin 27)
Digital IN 2 Bit 1 of the 16 bit digital input channels (Pin 28)
Digital IN 3 Bit 2 of the 16 bit digital input channels (Pin 29)
Digital IN 4 Bit 3 of the 16 bit digital input channels (Pin 30)
Separate Digital OUT Lemo Connectors
Digital OUT 1 Bit 0 of the 16 bit digital output channels (Pin 3)
Digital OUT 2 Bit 1 of the 16 bit digital output channels (Pin 4)
Digital OUT 3 Bit 2 of the 16 bit digital output channels (Pin 5)
Digital OUT 4 Bit 3 of the 16 bit digital output channels (Pin 6)