Dixon Valve One Piece 8 Frac Fitting" - Manual

Frac Fittings
wing nut male fitting female fitting male NPT fitting
One-Piece 8" Dixon Frac Fittings
Description Fig. 100 Part # Fig. 206 Part #
complete assembly (male, female, nut, O-ring) HUMF100800CS HUMF206800CS
female frac fitting HUFALL800CS HUFALL800CS
male frac fitting (includes nut and O-ring) HUM100800CS HUM206800CS
8" male NPT fitting STC80CS STC80CS
wing nut (forged) HU100800N HU206800N
O-ring (Buna-N) --- O447BU
split nut (forged) when replacing one-piece nut HU100800RN HU200800RN
Application:
• used in the transfer of water, chemicals and sand slurry at hydraulic fracturing sites
Features:
• one-piece stem design eliminates leak path as experienced with two-piece threaded systems
• interchangeable with current fittings; phase them into your operation
• durable and safe with reliable hose retention when crimped as specified
• 150 PSI (10 BAR) working pressure at 70°F (21°C)
• 3:1 safety factor (SF)
Materials:
• forged nuts meet AISI standards
• machined iron stems meet ASTM standards; zinc plated
• male NPT style stems are machined from schedule 40 steel pipe
• refer to the other side for fitting and ferrule dimensions
®
BOSS LPS
Low Pressure Systems
Products designed specifically for the oil and gas industry