Dixon Valve CM400 crimper User Manual
Holedall crimp system, Dixon
HOLEDALL
Dixon introduces a new dimension in permanently attached fittings
with the new Holedall Crimp System.
Dixon
Holedall Crimp System
Complete Crimp System Contains:
•
1 - Crimp 400 machine
•
1 - Digital control panel
•
1 - Mechanical stop
•
1 - Stand with foot pedal and die holder panel
•
11 - Small die sets from 1.02" - 3.07"
•
8 - Large die sets from 3.31" - 4.96"
Note: large dies are not stored on the stand
•
Quick change die tool
•
Master die I.D. (standard): 145 mm
•
Crimping force: 265 tons
•
Maximum hose diameter: 4" I.D.
•
Maximum die travel: 2.36"
•
Maximum die opening without dies: 7.16"
Length: 29"
Width: 20"
Height: 32"
Weight: 579 lbs.
•
Electrical power (standard): 230V 3Ph
•
Optional:
Electrical power: 440V 3 Ph
Electrical power: 220V 1 Ph
Pump HP: 7.5 HP
•
Manual / fully automatic crimping
•
Inch / metric settings
•
Approximate crimps per hour: 1415