Nitek CX254 - Manual (Page 6)

Appendix A
Installations for Rack Mounting CX254
This instruction page is only for rack mount units
Installation
The unit is supplied with two mounting ears. This allows the unit mount easily in any standard 19” rack cabinet. Using four
screws in each mounting ear attach one ear to each side of the unit as is show in the illustrations below.
REVERSIBLE MOUNTING EARS
To reverse the ears, simply remove the 4 mounting screws per ear. Move ears to other side of cabinet. Reinstall mounting
ears.
Location for mounting ears
Location for screws to mount
the ears.
Finally, position the unit in the 19” rack and use 4
screws to properly secure the unit in position. Due
to the weigh and size, it is recommended
that two persons work together in mounting
the CX254 unit in a rack.