Nitek FSS20111S - Manual

Video BNC
Connector
Model FSS20111S
1 Channel Video Optical System includes one
FRS20111S Receiver & one FTS20111S Transmitter
Installation and
Operation Manual
Introduction
The FSS20111S video system is designed to transmit and receive video and bi-directional data over single-mode or
multi-mode optical cable with real time digital transmission. The FSS2011S provides broadcast quality video
performance up to 20Km (single-mode) and 1.2Km (multi-mode).
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-230005
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
09162013 680160111
Reduce risk of fire or electrical shock. Do not
expose this product to rain or moisture.
Note: This installation should be made by a qualified
service person and conform with local codes.
Safety
The FSS20111S uses a Class 1 laser system in accordance with IEC 60825-1.
It is always advisable to follow good practice when working with optical fiber systems. This includes:
• Do not stare with unprotected eyes at fiber ends or connector faces.
• Use only approved filtered or attenuating viewing devices.
• For other safety issues and advice on good practices associated with optical fiber systems see IEC 60825-1 or your
local safety officer .
Data Port for
Camera control
5VDC Input Power
Jack (5.5mm x
2.5mm)
Wall Mounting Instructions
1. Mount the unit on a flat surface that provides room to run cable to the unit with-out exceeding minimum
recommended bend radius of the fiber cable.
2. There are two mounting holes provided, do not drill extra holes in the unit.
Fiber Optic
Port (SC)
TOP VIEW