Nitek RK170 - Manual

Note: This installation should be made by a
qualified service person and conform with local
codes.
Model RK170
Media Converter Rack
Installation and
Operation Manual
Rev 021511
NITEK
®
Europe Office:
De Schans 19-21 2a, 8231 KA Lelystad
The Netherlands
Tel: +31(0)320-2300005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL USA Office:
5410 Newport Drive, Rolling Meadows, IL 60008
Phone: (800) 528-4343
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
680250101
Reduce risk of fire or electrical shock. Do not
expose this product to rain or moisture.
!
Specifications
Size 1.7”H x 19”W x 5.75”D
(mm) (45H x 19”W x 146D)
Power Requirements 15 VDC @ 1 Amp
Class 2 Only
Installation
The RK170 provides mounting and power for the Media Converter units. Media Converter units should be inserted
from left to right into the unit. Units are designed to fit tightly next to the adjacent unit (see pictures).
STEP 1
Align unit to left side and front
edge of RK170.
STEP 2
Slide unit backwards to mate it with
the power connector.
STEP 3
Align multiple units
side by side.
STEP 4
Connect power supply on
rear of RK170.
540440111
Model RK170
WWW.NITEK.NET
MADE IN U.S.A.
15VDC
1Amp
Class 2 only
NITEK
R