Nitek WB5326 User Manual
Page 5
5
8. Log on with your new password. Select System and Time Settings to set the current time, date and time zone. If you
have a time server you can enter it here. The time setting will not affect the operation of the unit but is used in the
System Log file. Click Apply.
9. Select the Wireless and Basic Settings. Under Wireless Mode select Bridge from the drop down menu. Verify the
Channel Number is your selected channel. Set Channel mode for 40MHz. Click Apply.
10. Select the Wireless and WDS Settings. To work as a bridge you must input the MAC address for the mating unit.
Note the local MAC address as you will need it when setting up the mating unit. If this is the first unit being set up
you may need to come back and fill this in later. You must also set WDS Separation to “ENABLED”. Click Apply.