Nitek MC722MT-2 - Manual (Page 2)

Trouble Shooting
1. Is the Power LED on the media converter Illuminated?
Answer—No
● Check to insure power adapter is properly connected to the media converter and the power outlet.
● Is the correct 5vold DC adapter that was supplied with the unit being used?
● Contact tech support at (800) 528‐4343
2. Is the FX/ACT Illuminated?
Answer—No
● Check the Fiber connection to the media converter.
● Check the SC fiber connector is clean and properly connected to the fiber cable
● Contact tech support at (800) 528‐4343
3. Is the TX/ACT Illuminated?
Answer—No
● Check the network connector for proper termination.
● Check to insure the network is transmitting data.
● Contact tech support at (800) 528‐4343
Model MC722MT-2
10/100 FIBER MEDIA CONVERTER
Installation and
Operation Manual
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-2300005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
20810 681200105