Nitek ER16500C - Manual

INSTALLATION GUIDE
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-230005
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
E
U
R
O
P
E
ER16500C
The ER16500C is another component of the NITEK cutting edge EtherStretch line. Our EtherStretch solu-
tion allows for the utilization of existing cable infrastructure (coax or UTP) to transmit data from IP cameras
and other network devices along with power (PoE & PoE+) to operate these networked devices over the giv-
en copper media well over the 100 meter or 328 feet networking distance limitation.
The ER16500C is a Ethernet & PoE extending rack mounted sixteen port, power sourcing receiver unit with
built-in Gigabit switching capabilities. The unit requires very little installation time and absolutely no set up or
configuration. Independently the ER16500C will work as a Layer 2 PoE+ switch. Additionally, the ER16500C
and associated ET1500C transmitters (up to 16) can quickly turn ordinary coaxial cables into a series of high
speed network communication and PoE pathways. The ER16500C is a fully functional Layer 2 PoE+ network
switch with a 802.3AT power output on each of the sixteen network ports. Additionally, when used with the
ET1500C transmitters the system allows for cable runs of up to 500m/1600ft supplying both a network con-
nection and PoE+ power.
The ER16500C is completely transparent to the network thus requiring no IP and MAC addressing. Simply
connect your network devices to the transmitter LAN ports along with the existing cables to the receiver and
the system quickly begins communicating. LED indicators show the status and data speed of network com-
munications along with PoE power confirmation.
NITEK EtherStretch
ER16500C reliably extends network communications to overcome cable distance limi-
tations offering connectivity to devices in locations traditional networking does not allow. The ER16500C is
ideal for retro-fitting existing installations. The rack mounted unit is robustly constructed of molded steel cas-
ing with appropriate built in cooling and ventilation.
Description
16 Port IP Video Extender Over Coax
With Built-In Gigabit PoE Switch with
EtherStretch
IEC/UL 60950-1
Patent Pending