Nova-Tech WBZ..aM Series - Manual (Page 15)

© Adam Equipment Company 2010 13
• Press the [0] key to scroll through the available options.
• When the desired setting is displayed, press the [Tare] key to save
the setting. The scale will return to weighing.
• Press the [
Z    ] key to exit a parameter.
13.1 PRICE /kg AND /100g
NOTE: Not applicable for South Africa and Far East as this feature is
disabled at the factory.
The scale can be set to display the total cost using the unit price per kilogram
or the price per 100g. To set this parameter-
• Press and hold the [0] key for about 4 seconds during the normal
operation.
• Press the [0] key to toggle between “Unit kg” and “U
U U Unit 100g”.
• Press [Tare] to save the desired setting. The scale will return to
weighing
13.2 BACKLIGHT
The backlight may be set by the user. If the backlight is set to off, the battery
life will be maximised. With the backlight in operation the battery life will be
less depending on the extent the scale is used. To set this parameter-
• Press and hold the [1] key for about 4 seconds during the normal
operation.
• Press the [0] key to scroll through the following options-
“ bL ” “ AU ” Backlight will be automatically on when a weight
is on the platform or when a key is pressed and
will turn off after a few seconds when the weight
is zero or after a while, the last key was pressed.
“ bL ” “ oFF ” Backlight will be always off
“ bL ” “ on ” Backlight will be always on
• Press [Tare] to save the desired setting. The scale will return to
weighing