Nova-Tech WBZ..aM Series - Manual (Page 16)

© Adam Equipment Company 2010 14
13.3 AUTO POWER OFF
This parameter may be enabled or disabled by the user. If enabled, when the
scale is not used for some time (as pre-set by the user under this function) it
will switch off automatically. To set this parameter-
• Press and hold the [2] key for about 4 seconds during the normal
operation.
• Press the [0] key to scroll through the following options-
“SLEEP” “ModE” “0” Auto sleep mode disabled
“SLEEP” “ModE” “1” Auto sleep after 1 minute
“SLEEP” “ModE” “5” Auto sleep after 5 minutes
“SLEEP” “ModE” “10” Auto sleep after 10 minutes
• Press the [Tare] key to save the desired setting. The scale will return to
weighing.
13.4 AUTO CLEAR
The scale can be set to clear or retain the current unit price when the weight
on the scale is removed. To set this parameter-
• Press and hold the [3] key for about 4 seconds during the normal
operation.
• Press the [0] key to scroll through the following options-
“ A CLr ” “ on ” Automatically clear the price per unit price when the
weight on the scale is removed
“ A CLr ” “ oFF ” Will not automatically clear the unit price so that other
items of the same cost can be weighed.
• Press [Z/T] to save the desired setting. The scale will return to weighing
NOTE: If the Auto Clear function is not available (disabled at the factory) the
scale will double beep and continue without interruption when the [3]
key is held for 4 seconds.