Nova-Tech WBZ..aM Series - Manual (Page 18)

© Adam Equipment Company 2010 16
14.0 ERROR CODES
During the initial power-on testing or during operation, the scale may show an
error message. If an error message is shown, repeat the step that caused
the message. If the error is still shown contact your supplier for support.
ERROR DESCRIPTION POSSIBLE CAUSES
Err 4 Initial Zero is greater than
allowed when power is turned
on or the Zero key is pressed. Weight is on the pan when
turning the scale on.
Excessive weight on the pan
when zeroing scale.
Improper calibration of the scale.
Damaged load cell.
Damaged Electronics.
Err 6 A/D count is not correct when
turning the scale on. Platform is not installed.
Load cell is damaged.
Electronics is damaged.
15.0 REPLACEMENT PARTS AND ACCESSORIES
If you need to order any spare parts and accessories, contact your supplier or
Adam Equipment. A partial list of such items is as follows-
• Power Supply Module
• Replacement Battery • Stainless Steel Pan
• In use cover