Nova-Tech WBW Series - Manual (Page 10)

© Adam Equipment Company 2009 8
4.0 KEYPAD
KEYS PRIMARY FUNCTION SECONDARY FUNCTION
[O/I] Switches the scale on or off
[Zero] Sets the zero point for all
subsequent
weighing. The
display shows zero.
Escapes from a parameter or an
option without changing the
value.
[Tare] Tares the scale and stores the
current weight in memory as a
tare value, subtracts the tare
value from the total weight and
shows the results. This is the
net weight.
Enters the selected parameter or
value for setting.
[Unit] Selects the weighing units from
a preset list of available units.
Shifts the flashing digit to the
next digit when entering a value.
[Limit] Sets the limits for check
weighing and allows setting of
either the low limit or the high
limit or both.
Increments the flashing digit or
moves to the next option during
setting.
4.1 NUMERIC ENTRY METHOD
To set a value when required, use the keys as given below-
- [Limit] key to increase the flashing digit,
- [Unit] key to move to the next digit and
- [Tare] key to accept the value