Nova-Tech WBW Series - Manual (Page 20)

© Adam Equipment Company 2009 18
“
donE
”. If the old parameter is
other than “0000”, enter the old
one when “
P _ _ _ _ ” is displayed
and then enter the new password
twice when asked. When complete,
it will display “
donE
”.
13.2 SCALE PARAMETERS
To enter this section press and hold the
[Unit] key for 4 seconds. The display
will go directly to “S1 Un”.
These parameters are used to control the operation of the scale.
Parameter Description Options Default
setting
S1 Un Enable or disable weighing units, will
not allow to disable all units, at least
one has to be enabled.
kg
g
lb
oz
lb:oz kg
S2 bL Backlight set to always on, always
off or automatic on whenever a
weight is placed or a key is pressed. EL oFF
EL on
EL AU
EL AU
S3 AoF Auto Off- Disable or set time
increment to turn off scale. SLP 0
SLP 1
SLP 5
SLP 10 SLP 0
S4 diS Display all weights or only when
stable
ALL
StAb ALL
S5 Fi Filter setting to slow, normal or fast SLow
nor
FASt nor
S6 CAL Calibration
Not Available on WBW-M Approved
Scales Calibrate the
scale. See
Section 12.0. -