Nova-Tech LMI Series G - SG Metering Pump - Manual (Page 30)

24
SECTION 6
PARTS
6.1 GENERAL
This section gives information regarding replace-
able components.
6.2 ILLUSTRATED PARTS LIST
1. Figure and Item Number Column
a) The item numbers shown in the detailed
parts list correspond to the item numbers
appearing on the exploded view illustra-
tion. To find an unknown part number,
locate the part on the illustration and note
the item number. Look for the item number
on the detailed parts list. The part number
is on the same line. A dash (-) precedes
non-illustrated item numbers.
2. Description Column
a) The name of the item is in the description
column.
3. Part Number Column
a) The supplier’s part number is listed in the
part number column.
4. Quantity Column
a) The numbers appearing in the quantity col-
umn are the total quantity of the listed part
required in its immediate assembly.
5. Reference Code Column
a) This column is used to denote assembly
and detail part variations among similar
components (models) covered by this pub-
lication. When the symbol “A1”, “B1”, “C1”,
etc. is entered in this column, the part is
used only in the model (liquid end and
material codes, see Figure 1 and pump
data plate) at which the symbol appears. If
the column is blank, the part is used in all
models.