Pach and Company AeGIS 9000P Series Manual User Manual
Page 34
FUNCTION CODE
LOCAL PROGRAMMING
71
ENABLE NO PHONE BILL
Only enable for no phone bill
systems NPB9000P and NPB7000P
78
VIEW DIRECTORY AND NAME
Step 1
Log on to programming mode (see section 3.1). The display shows
Step 2
Enter Function Code 71 then press # and the display shows
Step 3
Press 1 to enable no phone bill the press
Step 1
Log on to programming mode (see section 3.1). The display shows
Step 2
Enter Function Code 78 then press # and the display shows
NNNNNNNNN= tenant name
Step 3
Press # to view the tenant code (directory code), the display shows
NNNNNNNNNNNN= tenant name
XXXX= 2-digit, 3-digit or 4-digit tenant code (directory code) associated with
the name.
Step 4 Press 3 to proceed to next tenant name and return to step 3 or proceed to
step 5 or press * and the display shows
Step 5
Select another Function Code to program different field from the table or
press * to exit the programming mode.
Pach and Company
Chapter 3
Page 29
AeGIS 9000P Series
PROGRAMMING
NNNNNNNNNNN
DIR No: XXXX
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
NNNNNNNNNNNN
Press # to view
SELECT PROGRAM
ENTER: _ _ PRESS #
NoPhoneBill:
0=NO 1=YES: 0