Pach and Company AeGIS 9000P Series Manual - Manual (Page 7)

Technical Specifications AeGIS 9000P Series
Power Input: 12 VAC 40 VA (supplied) or 12 VDC 40VA UL Listed Transformer
Current Consumption: Min 700mA idle, Max 900mA operation with optional Wiegand Card Reader and Radio
Reader
Emergency Battery: 12Vdc, 4Ahr rechargeable (not supplied)
Telephone Line: Standard voice grade RJ11 jack.
Night Light: 14V 0.080A 15,000 Average life hours.
Operating Environment: Temp. 32°F to +140°F Relative Humidity 0% to 95% non-condensing.
* Heater Pad (AHP5) is required if the ambient temperature is below 32°F.
Relay Output: Form C Dry Contact 120 VAC 10A/ 24VDC 10A/ 250VAC 7A
Memory Type: EEPROM
Tone Detection: Crystal controlled, capable of detecting short bursts 80 ms
Ringer Equivalence: 0.6B
Mounting: Surface or Semi-Flush.
Construction: 16-gauge cold rolled steel back box with brush stainless steel face plate or brass plating face plate.
Shipping: 16 lbs. or 7.3 kg. Approximate
Dimensions: 13-1/2" (34.3Cm) x 11-1/4 (28.6Cm) x 3-7/8" (9.8Cm) (HWD)
Specifications subject to change without prior notice
Accessories and Replacement Parts:
Visit our website www.pach-co.com or call 1-888-678-7224
1.3 Unpacking the System
Standard AeGIS 9000P Series consists of the following items, see picture below
Pach and Company Chapter 1 Page 2
AeGIS 9000P Series GETTING STARTED