Axis Communications Axis 211A - Manual (Page 31)

31 AXIS 210A/211A - Live View Config
2. Enter the path to the file on your computer or click the Browse button.
3. Select the user level for the uploaded file. This enables you to determine the pages
that the users can view.
4. When the path is shown correctly in the text field, click the Upload button.
All uploaded files are shown in the list in the lower section of this dialog. To remove a file,
check the box provided next to it and then click the Remove button.
Note: To use your own logo in the camera’s web pages, the file must be in gif format and the file name must be in
lower case e.g. mylogo.gif
Modify the Axis Look
Adjust the settings under Modify the Axis look, to change the background picture, banner,
colors and so on.
To use your own file for a banner, first upload it (see the following page) or select External
and enter the path to the file.
If you uncheck the box against Show setup link this removes the setup link from the
camera’s Home Page. You can then access the menus for setting up the camera by entering
the full setup address into the address/URL field of a browser:
Own Home Page
From Live View Layout, select the radio button Use custom settings and click Configure.
Check the box Use own home page in the Custom Settings dialog, To use a previously
uploaded web page (see above) as the default home page, select the page from the
drop-down list and click OK.
Default Video Format
Select the default format to use on the Live View page. Checking the box against Show
video format selection displays a drop-down list on the Live View page allowing you to
temporarily change the format.
Note:
It is also possible to view Motion JPEG when MPEG-4 is chosen as default and vice versa.
Default Viewer
When using Microsoft Internet Explorer (IE) for Windows, select your preferred method of
viewing moving images. The options are:
http://<IP address>/operator/basic.shtml