Axis Communications Axis 211A User Manual

Page 47

Advertising
background image

47

AXIS 210A/211A - System Options

Use the following DNS server address - enter the desired DNS server by specifying the

following:

Domain name - enter the domain(s) to search for the host name used by the AXIS

210A/211A. Multiple domains can be separated by semicolons (;). The host name is always

the first part of a Fully Qualified Domain Name, e.g. myserver is the host name in the Fully

Qualified Domain Name myserver.mycompany.com where mycompany.com is the

Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

Note:

This is not mandatory with regard to secondary DNS servers.

NTP Configuration

The AXIS 210A/211A can obtain the correct time from an NTP server. The address for the

NTP server can either be obtained via the DHCP server, or it can be entered manually.

Host Name Configuration

The AXIS 210A/211A can be accessed using a host name, instead of an IP address. The

host name is usually the same as the assigned DNS Name.

For more information, please see the online help

Link-Local IPv4 Address

This is enabled by default and assigns the AXIS 210A/211A an additional IP address for

use with UPnP

. The AXIS 210A/211A can have both a Link-Local IP and a

static/DHCP-supplied IP address at the same time - these will not affect each other.

HTTP

The default HTTP port number (80) can be changed to any port within the range

1024-65535. This is useful for simple security port mapping.

HTTPS

The default HTTPS port number (443) can be changed to any port within the range

1024-65535. HTTPS is used to provide encrypted web browsing.

NAT Traversal (port mapping) for IPv4

A broadband router allows devices on a private network (LAN) to share a single connection

to the Internet. This is done by forwarding network traffic from the private network to the

“outside” i.e. the Internet. Security on the private network (LAN) is increased since most

broadband routers are pre-configured to stop any attempt to access the private network

(LAN) from the public network/Internet.

Advertising