Axis Communications Axis 211A User Manual

Page 48

Advertising
background image

48

AXIS 210A/211A - System Options

Use NAT traversal when your AXIS 210A/211A is located on an intranet (LAN) and you

wish to make it available from the other (WAN) side of a NAT router. With NAT traversal

properly configured, all HTTP traffic to an external HTTP port in the NAT router is

forwarded to the camera.

Notes:

• For NAT traversal to work, this must also be supported by the broadband router.
• The broadband router has many different names: “NAT router”, “Network router“,

Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose

of the device is the same.

Enable/Disable - When enabled, the AXIS 210A/211A attempts to configure port mapping

in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the

camera (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router

and enter the IP address for the router in the field provided.

If a router is not manually specified, the AXIS 210A/211A automatically searches for NAT

routers on your network. If more than one router is found, the default router is selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter

the port number in the field provided. If no port is entered here a port number is

automatically selected when NAT traversal is enabled.

Notes:

• An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is

useful if e.g. your NAT router does not support UPnP and you need to manually configure

port forwarding in the NAT router.
• If you attempt to manually enter a port that is already in use, another available port us

automatically selected.
• When the port is selected automatically it is displayed in this field. This can be changed

by entering a new port number and clicking Save.

FTP

The FTP server running in the AXIS 210A/211A enables the upload of e.g. new firmware,

user applications, etc. Check the box to enable the service.

RTSP

LAN (intranet)

WAN (internet)

Broadband
(NAT)
router

ISP

Advertising