Avaya Wireless AP-3 - Manual (Page 287)

A
Avaya Wireless AP-3 User’s Guide A-1
Command Line
Interface (CLI)
In This Appendix
This section describes the AP’s Command Line (CLI) Interface. CLI
commands can be used to initialize, configure, and manage the Access
Point.
CLI commands may be entered in real time through a keyboard or
submitted with CLI scripts.
The CLI is available through both the Serial Port interface and over the
Ethernet interface using Telnet.
NOTE:
All CLI commands and parameters are case-sensitive.
• General Notes
• Command Line Interface (CLI) Variations
• CLI Command Types
• Using Tables & User Strings
• Configuring the AP using CLI commands
• Set Basic Configuration Parameters