Avaya Wireless AP-3 - Manual (Page 310)

CLI Command Types
A-24 Avaya Wireless AP-3 User’s Guide
Examples:
[Device Name]>show ipaddr
[Device Name]>show network
[Device Name]>show mgmtipaccesstbl
“set” CLI Command
Sets (modifies) the value of the specified parameter. To see a definition
and syntax example, type only set and then press the Enter key. To see
a list of available parameters, enter a space, then a question mark (?)
after set (example: set?).
Syntax:
[Device Name]>set <parameter> <value>
[Device Name]>set <table> <index> <argument 1> <value 1>
... <argument N> <value N>
Example:
[Device Name]>set sysloc “Main Lobby”
[Device Name]>set mgmtipaccesstbl 0 ipaddr 10.0.0.10
ipmask 255.255.0.0