Avaya Wireless AP-3 - Manual (Page 326)

Set Basic Configuration Parameters
A-40 Avaya Wireless AP-3 User’s Guide
Change Passwords
[Device Name]>passwd <Old Password> <New Password> <Confirm
Password> (CLI password)
[Device Name]>set httppasswd <New Password> (HTTP interface
password)
[Device Name]>set snmprpasswd <New Password> (SNMP read
password)
[Device Name]>set snmprwpasswd <New Password> (SNMP read/write)
[Device Name]>reboot 0
!
CAUTION:
Avaya strongly urges you to change the default passwords to restrict
access to your network devices to authorized personnel. If you lose or for-
get your password settings, you can always perform the
Reset to Factory
Default Procedure .
Set Network Names for the Wireless Interface
[Device Name]>set wif <index 3 (Single-radio APs) or 3 or 4
(Dual-radio APs)> netname <Network Name (SSID) for
wireless interface>
[Device Name]>show wif