Avaya Wireless AP-3 - Manual (Page 341)

Other Network Settings
Avaya Wireless AP-3 User’s Guide A-55
Configure MAC Access Control
Setup MAC (Address) Access Control
[Device Name]>set macaclstatus enable
[Device Name]>set macacloptype <passthru, block>
[Device Name]>reboot 0
Add an Entry to the MAC Access Control Table
[Device Name]>set macacltbl <index> macaddr <MAC Address> status
enable
[Device Name]>show macacltbl
Disable or Delete an Entry in the MAC Access Control Table
[Device Name]>set macacltbl <index> status <disable/delete>
[Device Name]>show macacltbl
NOTE:
For larger networks that include multiple Access Points, you may
prefer to maintain this list on a centralized location using the
RADIUS parameters (see
Set RADIUS Parameters ).