Setting up (entrance station) – Aiphone GH SERIES 0207 AIC User Manual

Page 28

Advertising
background image

- 28 -

8-1

Adjusting the Camera Angle

1. View from the initial camera position
2. Changing the camera angle
• Remove the rubber cap. Move the lever to the desired position.
∗ Do not forget to reset the rubber cap.
3. Image view area after adjustment
[1] When camera has been adjusted to the left
[2] When camera has been adjusted to the right

8-2

Entering Names and Addresses

• Remove the resident name/address plate or paper by pressing

the left or right end. (Peel off the plastic film.)

• Use a permanent pen to write the resident name and address on

the transparent plate and mount the plate on the module.

8

SETTING UP (ENTRANCE STATION)

1

2

3

GH-VA

113cm

24cm

24cm

50cm

113cm

65cm

GH-VA

95cm

65cm

50cm

GH-VA

GH-VA

GH-SW

GH-AD

[1]

[2]

Advertising