Ricoh Aficio SP 4110N - Manual (Page 49)

3. Connecting the Printer
Network Connection
Follow the procedure below to connect the printer to the computer through the network. Prepare the hub
and other network devices before connecting the 10BASE-T or 100BASE-TX cable to the printer's Ethernet
port.
Alternatively, the optional Gigabit Ethernet board, which supports 1000BASE-T, is available.
• Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could cause
malfunctions.
• The Ethernet cable is not supplied with this printer. Select your cable according to the network
environment.
1. Attach the supplied ferrite core at the printer end of the Ethernet cable.
AUB503S
2. Connect the other end of the cable to the printer's network, such as a hub.
AUB501S
47
3