Ricoh Aficio SP 4110N - Manual (Page 63)

IEEE 802.11b (Wireless LAN) Configuration
Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel
settings and their default values. These items appear in the [Host Interface] menu.
Setting Name Default Value
Comm. Mode 802.11 Ad hoc
Channel
(1-13) 13
(1-11) 11
Trans. Speed Auto
SSID blank
Security Method None
• To use IEEE 802.11b (Wireless LAN), set as the followings using the control panel: press the [Menu]
key, and then select [Host Interface], [Network Setup], [LAN Type], and then [IEEE 802.11b]. Also,
set the IPv4 Address, Subnet Mask, Gateway Address, DHCP, Frame Type (NW), and Active Protocol
under the [Network Setup] menu. For details about setting items, see p.53 "Ethernet
Configuration".
• The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface.
1. Press the [Menu] key.
AUB051S
The [Menu] screen appears.
IEEE 802.11b (Wireless LAN) Configuration
61
4