PROLiNK PIC1005WN User Manual - Manual (Page 45)

EN 42
7. Can I use LiveView in Macintosh OS X or other operating system without ActiveX?
As most IP surveillance devices are using ActiveX control for seeing live video, if you would like to use Plug & Play
IP video system on Mac OS, you will need to install software to emulate Microsoft Windows OS like Parallels
Desktop for Mac. Once you'd installed the Windows Emulator, you'll be able to run LiveView on Mac OS without
any problem.
8. Is there any other ways to view the IP Camera video on my Mac OS?
You may use RTSP protocol by typing rtsp://ip_cam_public_address/ID.password on the QuickTime Player (Open
Location) to access the video of the IP Camera.
For example: rtsp://60.250.205.59/001001003.ipcam
You can find the IP Camera public IP address from your router configuration status page.
9. Can I adjust the effective focus of the IP Camera?
The focus of the IP Camera is pre-adjusted and fixed during production; you cannot adjust the effective focus of
the IP Camera.
10. What should I do if my IP Camera password is forgotten?
The easiest way to solve this problem is to reset the IP Camera to the factory default. Please use a pointed object
to hold the reset button on the bottom for 5-10 seconds to reset to factory default setting. The default password
to view the camera video is ipcam.
11. How can I access the IP Camera web configuration page?
Open the LiveView software > Under Auto search > Right click the camera ID and click Web configure
12. How can I change my IP Camera video-play password?
Go to the web configuration page of the camera > Login Credential > Video > Video Settings > Password (play
video): type in your new password here > Save & Apply
13. What should I do if I cannot hear any audio sound from the IP Camera?
Go to the web configuration page of the camera > Login Credential > Video > Video Settings > Make sure Enable
audio microphone is selected > Save & Apply
14. How could I know if I need to install the Microsoft .NET Framework?
Since LiveView program is developed based on Microsoft .NET Framework 2.0, it is a must to install .NET 2.0 or
later. However, if you're using Windows XP SP3 Professional, Windows Vista and Windows7, it's not needed to
install .NET framework.