PROLiNK PIC1005WN User Manual - Manual (Page 49)

EN 46
23. How to configure with Night Mode?
There are two way in configure the IP Camera with Night Mode:
Method 1 : Via Web Configuration
Open IE and locate to the IP Address of the IP
Camera>login with credential> Video> Night Mode
Method 2 : Via LiveView
From the Camera List, right-click any IP Camera> tick
Night mode control
Choose either one of the following options:
a) Automatic day and night mode switch
The IP Camera will automatically turn on the IR LEDs when the night time is arrived or the environment is
becoming dark. There is a light sensor on the IP Camera that is doing this light detection.
b) Scheduled time of night mode
The IP Camera can also be scheduled to turn on the IR LEDs in a time range of each day.
c) Manual night mode control
The IP Camera can be manually forced to night mode (IR LEDs on) or day mode (IR LEDs off).
Automatic day and night mode
switch Scheduled time of night mode Manual night mode control
24. When the IP Cam is connected to the network through wireless connection, the video quality is not good, how
could I fix this problem?
When the IP Cam is connected using wireless network and the video quality is not good, it’s probably because the
distance of the IP Cam is too far away from the wireless AP(Access Point) or WiFi router, or there are too many
devices connected to the AP, or maybe because the WiFi antenna is not in the best position. Please try to figure
out which one is the cause of the problem and you can then fix this problem.
25. What’s the longest distance using the IP Cam to see the video?
When using the IP Cam to see a long-distance object, whether it’s clear or not depends on the size of the object.
Usually when your eyes can see something clearly in that distance, the IP Cam can also see that object clearly in
about the same distance.