PROLiNK PIC1005WN User Manual - Manual (Page 51)

EN 48
Appendix E. 3GPP/ISMA Operation
3GPP/ISMA is using RTSP protocol for 3G mobile phone to display the video stream from some network devices,
including IP Camera. The IP Camera supports the RTSP protocol and video/audio codec needed by 3GPP/ISMA. Users
only need to access the address RTSP://ip_cam_address/CAM_ID.password on the 3G mobile phone to access the
video of the IP Camera. No other extra configuration is needed on the IP Camera. Where ip_cam_address is the public
IP address of the IP Camera. CAM_ID is the unique Camera ID of the specific IP Camera. Password is the video play
password of the specific IP Camera(detailed in section 3.6). Different 3G mobile phone may need different operation to
be able to key in the RTSP address, please contact the 3G mobile phone customer service for more details.
The video quality and resolution is the same value as set on the “video settings” page. Since the bandwidth provided
by the 3G service is under 256k bps, better to configure the “Internet speed” of the IP Camera to 128k or 64k bps.
Notice 1:
When the audio microphone is enabled on the IP Camera, if the “Internet speed” in “video settings” page is bigger than
256k or the resolution is 640x480, the audio will be disabled for 3GPP/ISMA access. In all other cases, the 3G mobile
phone will be able to hear the audio from the IP Camera.
Notice 2:
When the audio microphone is enabled on the IP Camera, if there is any 3G mobile access to the IP Camera(the mobile
will hear the audio ), in this same time, there will be no audio on the LiveView playing window for this IP Camera.
For more information about operation on different 3G mobile phones, please contact us for detailed document.
 For iPhone users please download software mLiveView from App Store.
 For Android users please download software mLiveView from Market Store.