Teledyne 9110AH - Nitrogen oxides analyzer - Manual (Page 48)

TELEDYNE Model 9110AH NO
X
Analyzer Operator Manual, 01620, Rev. F
5-6
Table 5-2: M9110AH Setup Menu (Continued)
Level 1 Level 2 Level 3 Level 4 Description
Reference
Section
ZERO-LO-HI Do a zero, low, and high span
calibrate 5.3.2, 6.2
LO Do a low span calibrate 5.3.2, 6.2
HI Do a high span calibrate 5.3.2, 6.2
LO-HI Do a low and high span
calibrate 5.3.2, 6.2
SETTINGS
TIMER
ENABLE Enable/Disable chosen
sequence 5.3.2,6.2
START DATE Start date of selected sequence 5.3.2, 6.2
START TIME Start time of selected sequence 5.3.2, 6.2
DELTA DAYS Number of days to shift start
time each time sequence is run 5.3.2, 6.2
DELTATIME Number of hours to shift start
time each time sequence is run 5.3.2, 6.2
DURATION Number of minutes to spend at
each step in sequence 5.3.2, 6.2
CALIBRATE ON=compute new slope
and/or offset OFF=do a
span/zero check 5.3.2, 6.2
RANGE TO
CAL If AutoRange is ON, select
which range to calibrate LO or
HI 5.3.2, 6.2