Victory RS-2N-S7-FF (Manufactured after4-19-10) - Manual (Page 11)

ix ix
WARNING: Failure to keep condenser clean may cause premature failure of motor-
compressor which will NOT be covered by warranty.
Lubrication
Unless otherwise specified, all Victory refrigerators and freezers are equipped with permanently
lubricated motors. The compressor-motor is a sealed unit and is constantly lubricated when in
operation. The condenser and the evaporator motors are equipped with lifetime lubricated
bearings which never need to be oiled.
Installing Replacement Door Gasket (if required)
Removing
Beginning at one corner, pry gasket loose from the retaining strip. Peel remainder of gasket from
the door and discard.
Replacing
Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the
gasket in warm water to make it more pliable.) Align new gasket frame on the door retainer strip.
Starting at one corner, press each corner of the gasket into the retainer strip. Once started, the
gasket can be easily inserted around the entire perimeter of the door by simply press rolling into
place.
Keep Clean
“Door Gasket &
Retainer Strip”