# Work sheet for setting limits – Electronics International UBG-16 User Manual

## Page 27

3. During Cruise, Normal P

3. During Cruise, Normal P

3. During Cruise, Normal P

3. During Cruise, Normal P

3. During Cruise, Normal Power

ower

ower

ower

ower, Around 2,000 ft. , Leaned to P

, Around 2,000 ft. , Leaned to P

, Around 2,000 ft. , Leaned to P

, Around 2,000 ft. , Leaned to P

, Around 2,000 ft. , Leaned to Peak:

eak:

eak:

eak:

eak:

each cylinder:

B. Note EGT Differential

C. Set Upper EGT Bar Trip Point: Highest EGT Reading _____________ + 50 = ______________ (Limit)

2. During Cruise, Normal P

2. During Cruise, Normal P

2. During Cruise, Normal P

2. During Cruise, Normal P

2. During Cruise, Normal Power

ower

ower

ower

ower, Around 2,000 ft. , F

, Around 2,000 ft. , F

, Around 2,000 ft. , F

, Around 2,000 ft. , F

, Around 2,000 ft. , Full Rich:

ull Rich:

ull Rich:

ull Rich:

ull Rich:

each cylinder:

B. Note EGT Differential

C. Set Lower EGT Bar Trip Point: Lowest EGT Reading ______________ - 100 = ____________ (Limit)

Work Sheet for Setting Limits

Work Sheet for Setting Limits

Work Sheet for Setting Limits

Work Sheet for Setting Limits

Work Sheet for Setting Limits

1. During High P

1. During High P

1. During High P

1. During High P

1. During High Power Climb to 5,000 ft. +:

ower Climb to 5,000 ft. +:

ower Climb to 5,000 ft. +:

ower Climb to 5,000 ft. +:

ower Climb to 5,000 ft. +:

for each cylinder:

B. Note EGT Differential

Cyl #1 ____________________ + 40 = _____________________
Cyl #2 ____________________ + 40 = _____________________
Cyl #3 ____________________ + 40 = _____________________
Cyl #4 ____________________ + 40 = _____________________
Cyl #5 ____________________ + 40 = _____________________
Cyl #6 ____________________ + 40 = _____________________

Set High CHT Limits for:

Cyl #1 ____________________ - 40 = _____________________
Cyl #2 ____________________ - 40 = _____________________
Cyl #3 ____________________ - 40 = _____________________
Cyl #4 ____________________ - 40 = _____________________
Cyl #5 ____________________ - 40 = _____________________
Cyl #6 ____________________ - 40 = _____________________

Set Low EGT Limits for:

3. Set Other Limits:

3. Set Other Limits:

3. Set Other Limits:

3. Set Other Limits:

3. Set Other Limits:

A. Set EGT Differential Limit: Highest EGT Differential Reading __________ + 30 = __________ (Limit)

B. Set All Lower CHT Limits: 150'F

150'F

150'F

150'F

150'F

C. Set Shock Cooling Limit: 30'F/minute

30'F/minute

30'F/minute

30'F/minute

30'F/minute

D. Set other limits just outside the normal operating range for the temperature or function measured.

Cyl #1 ____________________ + 40 = _____________________
Cyl #2 ____________________ + 40 = _____________________
Cyl #3 ____________________ + 40 = _____________________
Cyl #4 ____________________ + 40 = _____________________
Cyl #5 ____________________ + 40 = _____________________
Cyl #6 ____________________ + 40 = _____________________