E-Mon E-D5-600800-S*SPL3-V3KIT3 - Manual (Page 48)

DIN-MON™ SMART METER
62-0442—04 48
7.2.13 Resetting Meter kWh/kW
To reset the meter kW and/or kWh readings, complete the
following steps:
1. Press MENU button.
2. Use UP or DOWN button until the arrow is on the
RESET K/KWH READ line.
3. Press SELECT button.
Use UP or DOWN button to make changes.
4. Press SELECT button to advance to the next setting. Repeat this step until all
the reset kW and/or kWh selections have been updated.
5. Press MENU to complete the changes. If changes were made, you’ll be asked to
save changes.
6. Press UP or DOWN to select ‘Y’ or ‘N’.
7. Press SELECT button to accept the selection. This will return you to the main
menu.
8. Select EXIT to get out of programming mode and return to normal display mode.
FIELD RANGE: RESET KW ONLY=[Y or N], Y=reset KW peak demand, N=will also
reset KWH; RSET ALL?=[Y or N], Y=reset KW peak demand and KWH accumulated
display
RESET KW ONLY? N
RESET ALL? N