FEC AFC1150 - Manual (Page 3)

)(& ,QF
Mounting Location Layout Example
Fig. 4.1.2-B
Figure 4.1.2-B provides reference for the layout of the AFC1150 controllers. The units may
be mounted in any desirable configuration providing minimum mounting requirements shown
in this diagram are not neglected. When installing wiring duct above or below the units,
please ensure adequate space is provided to allow for removal and installation of the units
without removal of the mounting screws. The units are designed with slotted mounting holes
for easy mounting to a backpanel using standard 8-32 screws. The mounting bracket may be
reconfigured for front flush mounting.
CHAPTER 4: INSTALLATION AND WIRING
Page 4 - 3