FIREPOWER MXL-IQ - Manual (Page 4)

ALD-2I Analog Loop Driver
The ALD-2I is an MXL-IQ Network option module which
supplies two intelligent analog circuits utilizing Fire Safety “I”
type intelligent devices. It occupies two addresses on the
MXL-IQ local network and through the use of a unique
communication protocol, devices connected to the ALD-2I
circuits are dynamically supervised by the MXL-IQ control
panel. Up to 60 programmable input and output devices may
be connected to each of its two circuits. Each circuit may
be wired as Style 4 or Style 6. See Table 1 for a list of
compatible devices.
ALD-2I
MOI-7 Output/Input Module
The MOI-7 is an MXL-IQ RS-485 Network module which
provides a fully programmable serial interface to the
MOD-16 output drivers and MID-16 input drivers. When
used with the MOD-16’s, it provides a serial annunciator or
relay driver. When used with MID-16, it provides program-
mable inputs. Each MOI-7 can operate up to eight MOD-
16’s and eight MID-16’s simultaneously. Each MOD-16
output and MID-16 input is independently programmable
via the MXL-IQ custom software.
MOD-16 Output Driver
MOI-7
The MOD-16 is an output driver module used in conjunction
with the MOI-7 as a part of the Fire Safety MXL-IQ System.
Up to eight (8) MOD-16s can be connected to an MOI-7
interface module. Each MOD-16 provides 16 open collector
current sinking outputs rated at 24 VDC, 50mA. MOD-16
outputs are programmable through the MXL-IQ custom
software.
MOD-16
MID-16 Programmable Input Driver
The MID-16 is an input module used in conjunction with
the MOI-7 as a part of the Fire Safety MXL-IQ System. Up
to eight MID-16s can be connected to a single MOI-7 along
with eight MOD-16 output driver modules. Each MID-16
provides a non-supervised input which can monitor
contact devices. Each individual MID-16 input can be
separately used as a part of the MXL-IQ custom program-
ming logic. These inputs can be individually set for either
Alarm, Supervisory, Trouble, Security or Status usage. They
can also be configured to provide supervision for lamps
driven by MOD-16 outputs. Screw terminals and connec-
tors are provided on the MID-16 modules for interface to
monitored devices.
MID-16
PIM-1 Interface Module
The PIM-1 is an MXL-IQ option module which provides a
bi-directional isolated RS-232 port for connection to
peripheral devices such as printers, CRT’s, VDT’s, diagnos-
tics, pocket pagers and Color Graphics. The PIM-1 mounts
on the MKB-4. It connects to the SMB-1 and provides a
screw terminal block for connection of RS-232 devices. A
number of supervised and non-supervised formats are
available.
PIM-1