Frieling MILKchiller™ 0601 - Manual (Page 6)

6
The MILKchiller™ is now ready for use.
Plug the power supply connector into the Power Input on the
MILKchiller™ control panel. Connect the power supply to the power
cord and plug it into the wall outlet. Set the Power Switch to ON.
Upon start up, the LCD will alternately flash COOLING, LOW and
WHOLE until the MILKchiller™ has reached the safety standard
temperature. (The “LOW” message will disappear when the full carton
or container is inserted into the chilling chamber.)
When it has reached the safety standard temperature, the LCD will
display the default setting “WHOLE”.
For more information on the setting display, please see the section
DISPLAY SETTINGS and CONTROL PANEL FUNCTIONS.
Power Supply
Connector
Power Inlet
Power Switch