AC International EZ-TP - Manual (Page 10)

Holding the EZ-TP
10 EZ-TP Owner’s Manual
!6 MIC VOL Control
Adjusts the sensitivity of the instrument’s
mouthpiece microphone to match your
voice (page 15).
!7 MIDI Connector
The supplied MIDI adaptor cable and an
optional USB-MIDI interface and stan-
dard MIDI cable can be connected here to
connect to other MIDI instruments or a
computer running MIDI music software.
(page 27).
!8 MASTER VOL Control
Adjusts the overall volume (page 11).
!9 PHONES/OUTPUT Connector
This connector can be used to feed the instrument’s audio output to head-
phones, a stereo system, or amplifier (page 7).
@0 DC IN 12V Connector
The supplied AC adaptor (PA-3C) should be connected here (page 6).
@1 STANDBY/ON Switch
This is the instrument’s power on/off switch (page 11).
Holding the EZ-TP
Hold the center of the valve case with the left hand, as shown in the illustration.
Your right-hand index finger should rest on valve 1, your middle finger on valve 2,
and your ring finger on valve 3. The right-hand thumb should rest comfortably
below valves 1 and 2, and the little finger should be placed in the upper finger hook
for support.
MIC VOL
MIDI
MASTER VOL
PHONES / OUTPUT
ON
STANDBY
DC IN 12V
!6
!7
!8
!9
@0
@1
8