AC International EZ-TP - Manual (Page 23)

Play With Song Accompaniment
EZ-TP Owner’s Manual 23
In this mode you can play the melody by playing the appropriate valve fingerings in
time with the song. There is no need to sing the melody in this mode.
The guide lamps will show you which valves to press to finger each note.
1
Select a song and press the PLAY MODE [2] button.
Press the valves indicated by the guide lamps that
light red. Song playback will stop and wait until
you play the correct fingering for each note.
Press the PLAY MODE [2] button when you want
to stop song playback.
Play by singing and using the fingerings learned in Play Mode 2.
1
Select a song and press the PLAY MODE [3] button.
The accompaniment will play through without stop-
ping. Sing the melody while playing the correct fin-
gerings for each note.
Press the PLAY MODE [3] button when you want to
stop song playback.
Play Mode 2 – Press the Valves Indicated By the Guide Lamps
Play Mode 3 – Sing and Use the Valves
● Changing the Guide Lamp Mode
The guide lamps normally light during song playback.
With the default “Aut” setting the guide lamps flash to indicate
melody note timing in Play Mode 1, while indicating valve
fingerings in all other modes. the guide lamp mode can be changed
as follows:
1 Press the button so that the lower indicator lights.
2 Press the [TEMPO] button – the button will light.
3 Press and hold the [TEMPO] button, use the [-]/[+] buttons to select
the desired guide lamp mode:
Aut ..... The guide lamps indicate melody note timing in Play Mode 1, and
valve fingering in all other modes.
F .......... The guide lamps always indicate valve fingering.
t .......... The guide lamps always indicate melody note timing.
b .......... The guide lamps flash to indicate the tempo and beat of the song.
L .......... Used for precise adjustment of the MIC VOL control (page 15).
oFF ..... The guide lamps will not light.
21